1 / 2
Ubiquiti UniFi U6+ Stand - (U6-Plus - U6-Lite - AC-Lite)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ubiquiti UniFi U6+ Stand - (U6-Plus - U6-Lite - AC-Lite)
- Rating
- 4.833 / 5
- Likes
- 50
- Downloads
- 828
- Makes
- 8
- Views
- 3,396
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Standard Digital File License

Hello Everyone
I designed two types of stands for Ubiquiti UniFi U6+ (U6-PLUS) Access Point. The stand is compatible with other UniFi AP models that have a dimension of Ø160 x 33 mm (U6-Lite, AC-Lite). I chose the optimal tilt angle of 12.5 degrees. On the bottom there are places for 4 non-slip silicone pad with a diameter of 5-6 mm and a height of 1.5-2 mm - this is an additional option that you do not have to use.
When you complete the project, please share a photo and a comment. Thank you and have a nice day.
How to Print ? :
- Material : ANY
- Layer Height : V1 - 0.2mm
- Layer Height : V2 - Due to the curvature of the model, the recommended layer height is 0.1mm
- Infill : 10-20%
- Wall Loops : 3
- Bottom Layers : 4
- Top Layers : 4
- Seam Position : Back
- Support : No
- Brim : No