Safety razor dispenser (spring powered)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little safety razor dispensor, mine holds around 80 blades without a problem, but i recomend less (60-70 seem to be ok)
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 135
- Makes
- 0
- Views
- 1,301
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
You need 4 M3x10 or M3x15 screws (glueing is also possible) and a coil spring thats 50 mm in lengh. I used those: https://www.amazon.de/gp/product/B07NVDRNXL/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
The springs should be somewhat soft so the blades can be easily loaded and unloaded.
Can be printed without supports.
I printed it with a 0,6mm nozzle and 0,35mm layerhight on my Prusa Mini+.
The box can be lengthened or shortend if you want more/less blades or have springs that are different lenghts