Qidi Plus4 Internal HEPA Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my attempt at making a replacement for the internal filter box on the Plus 4 that can accept HEPA filters.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 95
- Makes
- 0
- Views
- 861
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is my attempt at making a replacement for the internal chamber circulation fan filter box on the Plus 4 that can accept HEPA filters. I used the same filters as the person who previously designed one, but I designed it a little different.
I liked the idea of the other filter box. However, I did not like that it hung over the lip and allowed air in through the bottom. I changed it up a little so that it fits a little snugger, is cleaner, and uses less filament. I also tore off the ends of the filter to help it fit better. They are just glued on and came off easily.
USA Filters: https://a.co/d/5kqMt2F
Canada Filters: https://a.co/d/6nJDwxg
I printed it with ASA to withstand the temperatures of the heated chamber. No supports needed, but I suggest using a brim because the front corners don't have much surface area to stick to the bed. Might replace it with some PA in the future if I ever get any.