PIGGY BANK - Save money and have fun!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Piggy bank with three slots for fun and saving money!
- Rating
- 0 / 5
- Likes
- 22
- Makes
- 0
- Views
- 1,445
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Standard Digital File License
PIGGY BANK with three slots for fun and saving!
==========
General information about the model:
Size: 178x95x219 mm (XYZ).
Maximum coin size for all slots: ⌀32x3,6 mm

====================
Recomended printing paremeters:
First layer height: 0,25
Layer height: 0.2
Filling: 15%
Perimeters: 2-3
Support: not required
Brim: not required
Raft: not required
The thickness of the bottom wall is 1.65 mm.
====================
Print time of the main piggy bank model: ~9 hours at a speed of 120 mm/s
Filament type: PLA
Filament use: ~78 m/~230 g
Print time of the all models: ~10,5 hours at a speed of 120 mm/s
Filament type: PLA
Filament use: ~90 m/~270 g
====================
This model is for private use only! Prints are NOT FOR SALE! A model for commercial use will be available soon.






