1 / 3
Hatch for Ventilation Elbow
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hatch with gasket for Ventilation Elbow 220x55
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hatch, designed for rectangular inserts 220x55. “Ventilation Elbow 220x55”
I personally designed it to be mounted on the boiler vent, when it vents the hatch opens then stops it closes.
I recommend printing the pins and washers together, the other pieces as you want.
it might be a little difficult to fit into the insert, the shape is precise, it fits together
- 3 walls 15% infill, PETG PLA;
- Gasket TPU
- Supports like image below (not inside the insert or only in the short part);
- After assembled insert a piece of wire inside the pin to block it;
