MK3S+ black PSU replacement brace
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.17 – €0.21 net (excluding VAT)
For file: Insert PSU Brace_0.2mm_PETG_MK3S_15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 15.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A replacement part when you move the PSU from the printer
- Rating
- 4.898 / 5
- Likes
- 125
- Downloads
- 870
- Makes
- 56
- Views
- 2,973
- Reviews
- 49
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I changed it a little. Added the hexagons for looks and a small chamfer around the model.
Printed the brace with 30% infill.
G-code is with standard Prusament 0.20 profile for PETG.