7530 blower fan duct (Flsun SR)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan duct for a 75x75x30mm blower fan
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 1
- Views
- 173
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Fan duct for 75x75x30mm Blower fan. The file with clips is for a Flsun super race (SR) The other file does not have any clips and is smooth on all the sides ie you will need to find a way to attach it to your printer yourself. The connection point from fan to duct will need tape or something else to seal it. The tube connection is 22mm in (outer) diameter and should also be sealed in some fashion. Clips can either be glued together or taped or screwed idk just what ever you have lying around should be fine.
Filament: PLA (Does not matter just needs to be a rigid filament)
Layer Height: 0.2 or 0.4
Supports: Yes
Adhesion: Yes unless you are confident in your printers fist layer calibration then no
Weight: Without clips is 21g With clips is just under 28g
Speed: Does not matter I printed at 320mm/s and was just fine