J. Wellington Wimpy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I’ll gladly pay you Tuesday for a hamburger today!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wimpy! Should the small version be called Wimpy Wimpy?!?
This model is 1.8mm thick. Print with 0.2 layer height, and change color for the last layer.
There is only one layer of the Wimpy, so it works better to be a dark color with a light background.
The photos show both sizes. No surprise that the larger one has better looking text. I wanted to keep the look of E. C. Segar’s text, so I intentionally didn’t change the typeface.
To make the smaller one, I scaled the X and Y (but not the Z) by 50%. The larger one has a long edge of 234mm. If the larger one is too big for you, you might want to scale bigger than 50%. Or perhaps use a nozzle finer than 0.4mm. :-)
I hope you download and like ❤ this model!
Happy Printing!! 🎉