Marshall Amp Key Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€18.78 – €22.96 net (excluding VAT)
For file: Body1_0.1mm_PLA_MK3S_1d0h26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €20.87 excluding VAT (range midpoint).
- Weight reported by the author
- 187 g
- Print time reported by the author
- 24.43 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
JMP Marshall Keyholder look alike.
- Rating
- 0 / 5
- Likes
- 92
- Downloads
- 307
- Makes
- 0
- Views
- 3,611
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
Decided to make myself a key holder that looks like an old JMP Marshall Head unit. All of the prints should be self explanatory. the Main body, and the handle should be the only items requiring any support material. A dab of super glue was used to join everything together.
The Main Body, Feet, Handle, and Back Plate were all printed in black PLA.
The Gold Part, and Trim should be printed in gold
The Logo was printed in White.
You will need some separate hardware for the way I designed it. I used 7 Old female input jacks I had in a drawer for the amp head itself, and then 7 Jacks from broken cables. I used paracord pinched in the crimp able part of the input jack to make sure it stays put.
The backplate should be optionable if you don't want it. I just made it for a cleaner look, a third point of contact with the wall and as an easier way to try and line up your initial screws for securing it to the wall.