Raspberry Pi 4 Project Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.10 – €2.56 net (excluding VAT)
For file: Project Enclosure (RPi4) v13_Lid_0.2mm_PETG_MINI_2h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.33 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 2.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Raspberry Pi 4 project box/enclosure to house your Pi and other components.
- Rating
- 4 / 5
- Likes
- 34
- Downloads
- 416
- Makes
- 2
- Views
- 3,476
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I've designed this for a 3D Printing enclosure controller I'm building using a Raspberry Pi 4.
Design Features
- 1.6mm thick walls for sturdy construction
- 4 x 11mm knockouts for panel mount DC barrel jacks
- 4 x 6mm knockouts for panel mount 3.5mm jacks
- 3 x 20mm x 3mm slots for ribbon cables or other wires.
- Mounting posts for M2.5 brass inserts for Raspberry Pi 4
- Mounting post for DC-DC converter if you wish to power the Pi via GPIO (best to add protection circuitry if you do)
- Mounting posts for M2.5/M3 bass inserts to support other components
- Lid secured via M3 bolt into M3 brass insert on base.
Printing
Suggest using PETG, not sure how well PLA would hold up over time.
- Main Body:
- Material: PETG Prusament Anthracite Grey
- Print Settings (PrusaSlicer): 0.20mm Quality, 15% infill
- Supports: None
- Lid:
- Material: PETG Prusament Anthracite Grey
- Print Settings (PrusaSlicer): 0.20mm Quality, 15% infill
- Positioning: Print the lid top side down.
- Supports: Ideally paint on some supports for the small lips that lock into the base. Or select support on build plate only.
Hardware
- Raspberry Pi 4
- 12/24V to 5V DC-DC Converter:
- 2.5mm DC Barrel sockets and jack plugs
- 3.5mm 3 pole chassis socket and 3.5mm 3 pole plugs
- 3.5mm 4 pole chassis socket and 3.5mm 4 pole plugs (these connectors may require the holes to be enlarged slightly).
- M2.5 Brass inserts
- M2.5 x 5mm bolts (for Pi)
- M3 Brass inserts
- M3 x 8mm bolt (for lid)
- M3 x 4mm for DC-DC Converter and other mounting points
Additional Notes
This is my original design taking some inspiration from Dan Andersen's Compact Fysetc Spider and RPI 4 Case and 120mm Fan
Version History
- V11 - Initial Release
- V13 - Fixed gap between case wall and mounting bolt area. Smaller knockouts now 6mm, increased spacing between smaller and larger knockouts.