Peg Board Bracket for Hyper Tough Screwdriver Bits TS99913A
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for Hyper Tough Screwdriver Bits TS99913A. Suitable for US standard peg boards from big box store.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I didn't find a good and tight mounting system for US standard peg board so I made one.
Description:
This would fit US standard peg boards with ¼ to 9/32 inch hole and 1 inch hole spacing from center of hole. The bracket has some tolerances built in so plus or minus 1/64 inch or 0.5mm is fine.
This model is designed specifically for TS99913A like this one. There is a green one and they should have same dimension.
How to print:
- This model contains multiple parts, you will need to import the 3mf file to your favorite slicer as A SINGLE PART.
- This model contains built in support. Please DISABLE SUPPORT before generating gcode. Remove the removable support before inserting the bracket into the peg board.
- The tiny fins on the mounting mechanism may break. This is totally normal. This part is a sacrificial part for tolerances. However, if your bracket become excessively loose, please stop using it.
- Print tested working using ABS and PETG. Please do not print this with PLA as the mounting system will be extremely brittle and easy to break.
Print setting I used:
| Layer Height | 0.2mm |
| Brim | Mouse Ear or no brim |
| Support | None |
| Material | PETG/ABS |
| Infill | Gyroid |
| Wall Order | Inside/Outside or Inside/Outside/Inside |
| Perimeter Count | 4 |
| Top/Bottom Layer | 4 |
License:
Creative Commons (4.0 International License)
Attribution-NonCommercial
Absolutely no commercial use unless specifically authorized by the creator.
Message me for commercial license details.