1 / 1
Roger the cat Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x112.76mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1mm
Filaments Used:
PLA smartmaterials black Transmission Distance: 0.5
PLA smartmaterials grey Transmission Distance: 1
PLA smartmaterials white Transmission Distance: 1
This print uses 3 unique filaments
Swap Instructions:
Start with black
At layer #8 (0.72mm) swap to grey
At layer #11 (0.96mm) swap to white for the rest.