1 / 3
drying plate replacement food dehydrator SFD 128E, SFD 2105WH & SFD 3109BK
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replacing or adding a layer on a food dehydrator Sencor, diameter 33 cm, fit with models SFD 128E, SFD 2105WH & SFD 3109
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 1
- Views
- 163
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
made on 3 pieces to fit with my Prusa MK 3.5 printer. all printed in PETG, as the working temperature is about 50°C.
upper layer to be printed 3 times and glued (I use Epoxy 2 parts quick drying) together. a support is required for 1 edge
Lower part of the plate also printed 3 times (2 pieces in a raw are possible, but 3 seems to be impossible). no support
Optionnal:
- outer perimeter wedge to center both upper and lower parts of the plate (to be glued also),
- inner circle to reinforce the robustness of the center (i made it for a first layer, and in a second with out this circle it seems to be OK as well.