1 / 4
Archery - arrowhead & arrow extender
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you…
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 578
- Makes
- 4
- Views
- 1,824
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Info
Both designed for 8mm arrows.
I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS.
Recommended usage:
- Use the extender as close to the tip as possible for maximum efficiency (picture 3, method 3). If you use method 2 from pic. 3, arrow will break after small shake. (I tested shoot with it, and it survived one shot. It broke in my hand after few seconds.)
- You can use tape for smooth transition between extender and arrow body or wrap the entire extender.
- IMPORTANT: I use super glue to connect two arrowheads, although you can wrap the entire extender in super glue for more durability -recommended.
If you do not follow the recommended usage, the extender is more likely to break as follow in picture 4.
Print Settings
Rafts: No
Supports: No
Resolution: 0,2
Infill: 100%
Filament: PLA/PETG/ABS
Category: Sport & Outdoors