Spray shaker for drill (parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spray shaker for drill (parametric)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A spray shaker for drill. You can use it with your drill to shake very well your spray.
Is standard but parametric, so you can adapt it if your spray has unusual size. Is for M6 screw (parametric, so you can change it) and the hole is so perfect that you don't need any piece of metal to screw the screw; just screw directly in the hole. I'm not sure that the helix can be adapted to very thin size, but is only aesthetics, so it's not that bad.
You can set:
- the diameter of the spray
- the wall thickness
- the size of the screw
The gcode is for the MINI/MINI+ with IS and for PETG, that i suggest, but I think that it works also in PLA.
I also have a video for that but I can't upload here… is an MP4 but it doesn't work on printables…