1 / 2
Breadboard Base Project
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a 3D printed base for three MB-102 type breadboards (from Aliexpress).
I designed it using Tinkercad.
Print the base, face down. It measures approx. 20 x 18cm and can take about 15 hours with 15% infill at 0.2mm resolution if using an Ender 3 or similar printer.
(no supports are needed)
Instructions for the wiring etc. are on my website .