1 / 2
MINI x-axis stepper motor cable guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable guide for the Prusa Mini's x-axis cable. With this guide, the cable is guided near the extrusion profile.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Is it overengineered? Yes. Can you overengineer it even more?! definitely!
Requires a 3030 M5 t-nut and M5x12 screw, optional a 2.3mm wide cable-tie.
I wanted the x-axis motor cable to run close to the extrusion profile, thus I sketched this little thing. I also had too many M5 t-nuts here… If you think it is overengineered: yes it is and there are much more elegant designs out there.
Changelog:
- v2: Design is not as fancy but can be printed more easily. Has two holes for zip ties.
- v1: Initial Design