Belgian Malinois
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Project: Belgian Malinois
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 203x203mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Inland Brown Transmission Distance: 2
PLA Kexcelled Light Brown Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Brown
At layer #12 (1.04mm) swap to Light Brown
At layer #16 (1.36mm) swap to White for the rest.
---------------------------------
Project: Mosaic Belgian Blue 1.0.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 203x203mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Sunlu Sky Blue Transmission Distance: 2.6
PLA Sunlu Matte Blue Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Sky Blue
At layer #18 (1.52mm) swap to Blue
At layer #20 (1.68mm) swap to White for the rest.