Sunlu FIlaDryer S2 filament output guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Auxiliary piece to guide the pfte tube across the FilaDryer S2 close door, reducing the friction with the walls.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 65
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Auxiliary piece to guide the pfte tube through the closing door of the FilaDryer S2, reducing friction with the walls.
There are two exit options:
· Horizontal, picking up the filament from the top back
· Vertical, picking up the filament from the bottom front
Important notes:
· Fix it with double-sided adhesive (better 3M or similar) or/and M2 10mm self-tapping screw.
· 2 x PC4-M6, pneumatic connector.
· use screw tap M6 in the output holes.
Includes a guide to make a hole in the wall of the lid of the FilaDryer S2, to pass the screw M2 x 10mm
Recommended:
· Use PETG (makes it easier to thread screws into holes)
· Layer height ≤ 0.2mm