Whale Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My partner Felix and I created this Whale fidget, and it came out really cool.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Design statement
You will create a telescoping fidget device using sketch offsets and drafted extrusions/cuts. You and your partner(Felix) will be “accountabillbuddies”. This means you will provide feedback on initial designs and plans and help each other solve problems and troubleshoot errors as they happen. You are NOT REQUIRED to have identical designs, but it will certainly make the process easier. Me and Felix decided that we wanted to create a fidget that is a whale. We were scrolling through pictures for reference and the whale caught our eye, so we decided to make it. Go check out Felix's account-@felixwang_2501929
Constraints
- The sketch must begin with a constraint box, (center-rectangle created from the origin)
- Your outermost outline must fit within an 8cm x 8cm box or equivalent area (64cm2)
- Dimensions/Relations should be efficient.
- It is not required to fully define your entire sketch, but it will help.
- The sketch must contain zero error messages.
- Demonstrate efficient use of “Offset Entities”
!!!!ALL OFFSETS ARE BY 0.1 cm!!!!
We started off by using arcs and lines (no specific dimensions and DO NOT USE SPLINE TOOL, it will not work for offsets) to trace a picture of a whale.

Then we separated the tail end of the whale with 3 lines connecting in the middle.

Next, we selected the chain on one side of the whale tail, offset it by 0.1cm, and made sure the offset was inside the tail, not outside.

Then we repeated this process on the other side.

Then we offset the body of the whale.

We deleted the 3 lines.

Then we selected one of the chains and offset it then did that again and again until we got it looking like this.

Extruding the shape
We selected the outside ring on the whale and extruded it .75cm up with a 15-degree angle.

Then we selected the 2nd ring on the main body of the whale and cut-extruded it by the same 15 degrees but the direction is through all.

Then we repeated this process with the next ring and alternated between extruding and cut-extrude

Until we got to the finish side

-Note we also did this with the tail pieces

Mirror
Now to finish the object we need to mirror it about the front plane. Select the mirror tool, go to bodies to mirror and select the full object. Then we went to the plane part and mirrored it about the front plane. We need to select the merge solids part so the object is together.

ALL DONE!!!!!!!

Design changes
In the sketch processes, at the tail of the whale, there was a line that was not tangent with a line it was supposed to and it was breaking the sketch so we made it tangent and fixed it.

We designed the fidget at the beginning to have a full height of one cm, meaning that the first extrusion height was .5cm tall. The angle of that first extrusion height was 15 degrees inward.
Version 1

This design did not work because when we shook the Whale some of the rings would pop out meaning that there was not enough height or angle to catch the rings so they fell. To fix this problem we increased the height of the object to 1.5 cm, making the first extrusion .75cm tall. We kept the angle of 15 degrees and printed out the Whale.
Version 2

This print worked out and when you shake it, no matter how hard, the rings do not come out if printed right. This is the file attached the others are not. The next, and final print, is version 3 which has a height of 1cm (.5cm first extrusion) but this time we change the angles of the first extrusion to 23 degrees (this was the highest degree without glitching the software).
Version 3

I did not get a chance to print this but hypothetically it should work. This print was really to see if we could make it work with a 1cm total height.
Overall changes
| Version 1 | Version 2 | Version 3 | |
| Full height | 1cm | 1.5cm | 1cm |
| Extrusion height | 0.5cm | 0.75cm | 0.5cm |
| angle | 15° | 15° | 23° |
THANKS FOR READING!!!!