Boite à cartes de visites paramétrique - Parametric Business Card Box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.56 – €1.91 net (excluding VAT)
For file: boite cartes de visite 85 x 55_0.4n_0.2mm_PLA_MK4IS_57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 57.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Entrez les dimensions des cartes, la boite s'adapte. Enter the dimensions of the cards, the box will fit.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Pour modifier les dimensions de la boite, editez le tableur dans le fichier freecad (atelier spreadsheet) et modifiez les valeurs des cases bleues uniquement. Pour les longueurs les rentrer sous la forme "=xxmm", pour les pourcentage mettre uniquement la valeur.
Vous pouvez modifier les paramletres suivants :
longueur de la carte
largeur de la carte
hauteur de la boite
épaisseur des parois
ecart entre la carte et le bord intérieur de la boite (1 seul coté)
ecart entre la boite et le couvercle (1 seul coté)
Dimension des poignées en pourcentage
-------------------------------------------------------------------------------------------------
To change the dimensions of the box, edit the spreadsheet in the freecad file (spreadsheet workshop) and change the values of the blue boxes only. For the lengths enter them in the form "=xxmm", for the percentages put only the value.
You can change the following settings :
Card length
Card width
Box height
wall thickness
Gap between the card and the inner edge of the box (1 side only)
Gap between box and lid (1 side only)
Handle dimensions in percentage