Joolca HOTTAP Water Inlet/Outlet Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement caps for Joolca HOTTAP Water Inlet and Outlet Covers.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 1
- Views
- 179
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
V2 - Updated with a thicker base for a little bit of impact resistance. If you want the original covers dimensions, don't download V2.
The plastic covers for the water inlet and outlet on the Joolca HOTTAP tend to break because the plastic is too rigid. I designed a replacement to be printed in TPU to give it more flexibility. Based on the print settings below, it is tight enough to stay on the water inlet/outlet, but is not so tight that it is difficult to remove.
Printer: Sovol SV08
Filament: Overture High Speed TPU
Layer Height: 0.16mm
Infill: N/A
Supports: Yes, and I used tree supports.