2025 Shutter Shades
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick print glasses for 2025 New Year's Eve with upgraded filament hinge mechanism & multiple sizes.
- Rating
- 4.895 / 5
- Likes
- 672
- Downloads
- 2,854
- Makes
- 45
- Views
- 8,006
- Reviews
- 38
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
Quick print glasses for New Year's 2025!
Remix Info
Primary new thing here is the filament hinge inspired by a different shutter shade remix. The original openscad design was really good but the snap-fit arms were very fragile. I used blender for some booleans then did manual reinforcement of the hinge portion and added a nose bridge. Turned out nice. Created sizes for adults, teens, kids, and toddlers from this size chart.
Source models:
- My 2024 design
- My 2023 design
- My 2022 design
- Hinge inspired from thing:4703203 by nutshell
- Customizable
openscadthing:1603773 by drjames - Original shuttershades design thing:28706 by cmcnamara
Printing
Use small segment of 1.75 mm filament for the hinge; heat with soldering iron or similar to solidify. You can use a 2mm drill bit if the holes are a bit snug. They are modeled at 2mm so it just depends on your printer.
PLA is fine if you are gentle but the hinge is stronger with HTPLA/PETG etc. If you have the textured bed you may want to use that so the surface finish is nicer. I do recommend using “don't cross perimeters” setting to reduce PETG stringing (enabled in the 3mf).