HueForge Picolo Bola de dragon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arte en 2D diseño hueforge de picolo personaje de bola de dgragon
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 7
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- GNU General Public License v2.0
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 190.01x150.23mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Tough Black Transmission Distance: 0.6
PLA Kexcelled Fluorescent Red Transmission Distance: 4.5
PLA Kexcelled Fluorescent Orange Transmission Distance: 6.5
PLA BambuLab Matte Grass Green Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Kexcelled White Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Fluorescent Red
At layer #9 (0.8mm) swap to Fluorescent Orange
At layer #12 (1.04mm) swap to Grass Green
At layer #13 (1.12mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to White
At layer #22 (1.84mm) swap to Yellow for the rest.