Gridfinity Bins for Nextruder Nozzles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile bins store Nextruder nozzles in their tubes.
- Rating
- 4.875 / 5
- Likes
- 21
- Downloads
- 142
- Makes
- 10
- Views
- 451
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a family of six Gridfinity bins to store Prusa Nextruder nozzles. There are three basic styles – 3 nozzle flat storage, 6 nozzle flat storage, and 3 nozzle tilted display, and each has a variant with or without finger cutouts on the sides for grabbing the nozzles.
They are all 1x2 bins (42x84mm), either three or four Gridfinity units tall (~25 or 32 mm). They can be stacked with other Gridfinity bins sometimes.
| Style | Height (7mm units) | Stackable? |
| 3 nozzle flat | 3 | yes |
| 6 nozzle flat | 4 | only when empty |
| 3 nozzle tilted | 3 | only when empty |
Remixing
I modeled these bins in Fusion 360. I've included the Fusion design file (.f3d) and two STEP files for your remixing pleasure. One STEP file has the three styles with finger cutouts; the other has no cutouts. In the Fusion 360 design, change the user parameter finger_cutout_boolean to 0 or 1 to disable/enable the cutouts.
Printing Instructions
Use 0.2mm layer height. The filament type, infill, perimeters, etc. are not critical.