Infant toy - beanbag

The idea of this toy is to do it simple and lightweight.
Before the completion, pause print and put something inside for noisy (I used 7-12 rise grains).

Here you have 2 version of the toy with different print ways and complexity.

1. Version V2  have to be done with:
   - 2 layers in perimeter (work good for me but you can try to change) 
   - 0% infill
   - resolution 0.15 
   - Printing time ~2 hours
   Important Note: The complexity of this model is starting in ~96%, 
   - pause print in 96%
   - put rise grains inside
   - continue to print with speed 50% or less.
   - I printed this model many times w/o problems

    2. Version V3 can be printed with default printer settings:
        - 2 layers in perimeter
        - 20% infill
        - resolution 0.15

I suggest to print V2 version but if you are the beginner or have prints issues print V3 

Differences between V2 and V3 models:

1. V3 model more stronger than V2
2. The weight of the V3 model is ~2 times greater than V2 model
3. The sound of the V3 model is less resonant than the V2 model
4. The V3 model can be printed as is, when V2 model printing little tricky: have 0% infill and required to slow down speed before the print completed.