Shimano I-Spec II brake lever spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces a missing spacer for Shimano brake levers with the I-Spec II mount standard.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 58
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Several Shimano hydraulic disc brake levers have the option to run i-Spec II direct-mount shifters, so there's extra space built into the brake lever clamp for these. If you don't run direct-mount shifters, then you need a spacer to fill this gap. The brakes come with this spacer (the black one in the photos) but if the brakes came on your bike with the shifter and you didn't get the spacer, or you lost the spacer, you might need a replacement. This fills the bill.
I printed with PETG at 0.2mm layer height (0.4mm nozzle) and 2 or 3 shells, although that only makes a difference in the locating pin. Supports should not be needed although the overhang at the bottom of the bolt flange might be a little messy, but will still be completely usable.