1 / 3
Wallmount Speedmarker Lets Bastel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wallmout holder for Lets Bastel Speedmarker
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 69
- Makes
- 1
- Views
- 223
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a Wallmount for Lets Bastel Speedmarker. It is designed to screw it on a wall. Another possibilty is to fix it on a wooden plate to use it on a french cleat wall. The punches are made for conutersink head screws up to 3.5mm diameter.
In the back there is an additional punch to aply a 6 mm diameter Neodym-Magnet.
My Print Settings:
Material: PETG (I guess PLA would be fine too)
Layer Height: 0.2mm
Infill: 20 %
Support: Snug, on build plate