Rachio Power Brick Wall Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mounted hanger for a Rachio Sprinkler Controller transformer - used for winter storage.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 1
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Do you live somewhere where the temperature is below freezing for the winter? Then you may also want to use this. After we winterize our sprinklers, I like to unplug my Rachio controller as it will go 5-7 months without needing to be used.
Print in the orientation pictured below no supports needed (fusion exports the STL in an odd orientation so you’ll need to change that when printing).
Holes should fit a #4 or #6 wood screw - hole dimensions pictured below.
Dimensions are aprox 55mm deep (sticking off of the wall), 65mm wide/across, and 55mm high. 