1 / 4
Kingroon KP5L - Base for using the KP3S BMG mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this base you can use the same mod created by LMaker for the kp3s on the kp5l.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 1
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this base you can use the same mod created by LMaker for the kp3s on the kp5l.
You don't need any additional screws, just replace the original base of the kp5l and mount it.
To assemble the X tension band, you will need 2X M4 nuts .
You need supports to print the base. See the attached images . For greater durability of the piece, print at least in PETG.
NOTE: *Here you will only find the base, the other files are in the creator's profile, go there to download them.*
Thank you very much! I hope you enjoy it.