1 / 6
Microswiss NG CR Touch with EBB36 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the use of the EBB36 and a stronger-designed CR Touch mount.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 0
- Views
- 440
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Parts Needed:
- M3 Heat Set Inserts x6
- Four for the probe mount
- Two for the EBB36
- M3x25mm screws x4
- For attaching the EBB36 Mount to the extruder motor
- M3x6mm screws x2
- For attaching the probe to the probe mount
- M3x8mm screws x4
- Two for attaching the EBB36
- Two for attaching the probe mount to the EBB36 mount
Print Settings:
- 4 Walls
- No supports
- 10% Infill (or whatever you choose)
- PETG, ABS, or ASA
Probe offset:
- X: 47.04mm
- Y: 15.6mm
- Z: 3.34mm
DISCLAIMER:
THE OFFSETS ARE CALCULATED FROM THE MODELS IN SOLIDWORKS. YOUR RESULTS MAY VARY.
YOUR Z OFFSET WILL BE SLIGHTLY DIFFERENT. HOWEVER, 3.34mm WILL BE A GOOD STARTING POINT.
I AM NOT LIABLE FOR ANY DAMAGE CAUSED TO YOUR PRINTER/BUILD PLATE IF MY VALUES ARE USED. USE MY VALUES AT YOUR OWN RISK.