1 / 4
Aluminium/cling foil or baking paper holder — image 1
1 / 4

Aluminium/cling foil or baking paper holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A holder for the aluminium or stretch foil/baking paper.

Rating
5 / 5
Likes
487
Downloads
962
Makes
7
Views
4,877
Reviews
9

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Share Alike

My goal was to create a simple model that requires no supports and would print in an acceptable amount of time. For this last requirement, I made the walls 1,8 mm thick (as I am using a 0,6 mm nozzle - you can safely set 0,6 mm line thickness with a 0,4 nozzle too) - a happy middle ground between the number of perimeters and sturdiness.


The inner dimensions are 50 × 50 × 225 mm, so all common foil boxes should fit. My printer's max print height was a limiting factor for the height of the model :)

There are single and double versions.

For mounting, I used double-sided tape placed on top, in the middle, and on the bottom (tape up to 20 mm wide fits perfectly).

Tags