Star knob M8 with metal inlay
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.01 – €1.23 net (excluding VAT)
For file: m8_5er_sterngriff_optmiert_v3_pla_optimal.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.12 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a large turning knob designed for heavy use in woodworking jigs and similar applications.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 295
- Makes
- 2
- Views
- 1,304
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a large turning knob designed for heavy use in woodworking jigs and similar applications. It contains a M8 metal nut inside to make a very rigid thread.
Outer diameter is 60mm.
I recommend using "Prusa Control" Slicer for easy inclusion of a print pause command to allow the insertion of the nut..
See https://prusacontrol.org/ for details.
See printing instructions below for details how to print.
Print instructions
Category: Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0,2
Infill: 20
Notes:
Can be printed in PLA, ABS or PETG
For maximum stability increase the thinkness of the outer walls, top and bottom layers. Increasing the infill over 20% is not neccessary.
The STL is optimized to be printed with 0,2mm resolution. This is neccessary to have one layer tolerance above the inlay M8 nut to avoid a collision with the nozzle.
Needs a printer pause at 9,4mm layer height.using m600 command.
G-Code for Prusa i3 MK3 is added as a Reference.