Copic Sketch Marker Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A box for storing various capacities of Copic Sketch markers. Pre-made capacities for 35, 42, 56, 64, 72 & 81 markers.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 90
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A box for Copic Sketch alcohol based markers. I got tried of digging around in the bottom of a tote bag searching for a particular color when out and about.
The box has the Copic logo embossed on the front & back of the box, as well as top of the lid.
Two lid options are available. One is a simple slip cover which has a somewhat snug fit. The other has a detent to add a little more friction to lid if you prefer that option. If the lid is a bit too tight it can be adjusted with abrasives.
The marker holder section is 101.2mm tall if you only want the bottom part. The box is 153.9mm tall with the lid.
The marker holder section may take a few minutes to slice on older machines, larger capacities will take longer than smaller ones.
Dimensions
| Capacity | Markers Front-Back | Markers Left-Right | Dimensions LxWxH (bottom only) |
| 35 Copic Sketch markers | 5 | 7 | 140.15 x 77.9 x 101.2mm |
| 42 Copic Sketch markers | 6 | 7 | 140.15 x 92.4 x 102.2mm |
| 49 Copic Sketch markers | 7 | 7 | 140.15 x 106.9 x 101.2mm |
| 56 Copic Sketch markers | 8 | 7 | 140.15 x 121.4 x 101.2mm |
| 56 Copic Sketch markers | 7 | 8 | 159.4 x 106.9 x 101.2mm |
| 64 Copic Sketch markers | 8 | 8 | 159.4 x 121.4 x 101.2mm |
| 72 Copic Sketch markers | 8 | 9 | 178.65 x 121.4 x 101.2mm |
| 81 Copic Sketch markers | 9 | 9 | 178.65 x 135.9 x 101.2mm |
Changing the box for other sizes
The number of markers is set in the parameters in Fusion 360. I wouldn't go narrower than 6 markers wide since the logo on the box section will get clipped. If you go narrower than that you'll need to drop the logo. The logo should center itself if you make the box larger using parameters. Parameters can be found in the Modify menu.
Print Settings
Printer: Ender 3 Pro w/ Micro Swiss direct drive
Material: PLA or PETG (pretty much anything stiff should work)
Rafts: No
Supports: No
Resolution: 0.08-0.2mm
Nozzle: 0.2mm
Walls: 2+
Infill: 10%+
Walls/Shells: 2+