1 / 5
Poker Chips (Single Color) 单色扑克筹码 — image 1
1 / 5

Poker Chips (Single Color) 单色扑克筹码

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Translated by Chat-GPT

This is a simple and easy-to-print poker chip designed with a single color, so there’s no need to change colors during printing.

Since it’s a single color, I used other methods to simulate the white Edge Spots typically seen on poker chips. I ultimately opted for engraved lines instead of raising or lowering the height of the Edge Spots. The purpose of this design is to give the chip a cleaner look while maintaining a consistent height when viewed from the side. The engraved grooves also help retain a good level of distinguishability when the chips are stacked.

Given the small size, there is no need to add chamfers.

It is generally recommended to print using standard chip colors: 1, 5, 10, 25, and 100 correspond to white, red, blue, green, and black, respectively. The suggested print quantities are in a ratio of 4:3:2:2:1. Of course, you can decide on the color and quantity of each denomination based on your own preference.

The chip dimensions are 40mm × 2mm. You can scale them according to your preference, but I cannot guarantee the visibility of details if the size is reduced.

The recommended layer height for printing is 0.2mm. It is also suggested to enable top surface ironing for a smoother and finer appearance.

 

---

 

中文描述

这是一款简单易打印的扑克筹码,采用单一颜色设计,所以打印时无需更换颜色。

由于是单色,所以采用了其他方法来模拟筹码上白色的 Edge Spots。我最终选择了雕刻线条,而不是整体抬升或降低 Edge Spots 部分的高度。这样做的目的是使筹码外观更简洁,并且从侧面看上去能够保持一致的高度,同时雕刻的凹槽让筹码在堆叠时也不会丢失太多的可辨性。

由于体积很小,所以没有必要设计倒角。

通常情况下建议使用标准筹码颜色打印,1、5、10、25、100 分别对应白色、红色、蓝色、绿色、黑色。打印数量建议 4:3:2:2:1。当然,你也可以根据自己的喜好来决定每种面值筹码的颜色和数量。

筹码的尺寸是 40mm × 2mm,你也可以按照自己的喜好来缩放打印,但是如果缩小尺寸,我不保证细节的可辨性。

打印层高建议 0.2mm。建议添加顶面熨烫,以获得更加平滑细腻的外观。

Tags