F/A-18E Super Hornet Aircraft Kit Card with Compliant Folding Wings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The single seat version of the F/A-18 aircraft! A 1:265 model
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 77
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Unleash the thrill of modern naval aviation with this 1:265 scale model of the F/A-18E Super Hornet! Known for its advanced avionics, precision strike capabilities, and versatility as a carrier-based fighter, this model of the F/A-18E also features folding wings for compact storage.
The F/A-18F is my friend's favorite aircraft, so I felt I had to try my hand at it and all the variants!
Included are parts for non-folding wings and/or no landing gear (as some of you have requested that in the past).
To fold the wings, slowly apply pressure to fold the wings up. they will make a small snap sound as you create this hinge, but don't worry! it will not snap unless you fold it downward (I have only tested this with a couple different brands of PLA, I don't know about other filaments).
To insert the vertical tails, rather than inserting the bottom into the slot in the main wing, I have found it easiest to start the top of the vertical tail through the slot from the bottom of the main wing, and use a flat surface to push the tail up through the main wing slot.
Best of luck! I always love to see makes and get feedback on the models!
Recommended layer height: 0.2 mm
print all the variants!