HueForge - Funny Chinchilla Sign v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a newer model of my original design:
https://www.printables.com/model/798718-hueforge-funny-chinchilla-sign
This is a funny sign that I made and have placed next to my chinchilla's cage! We refer to her as a potato quite often, and figured this sign would be fitting for her. Attached is the 3MF I used to print this on the Bambu Lab X1C! Please see below for recommended settings and the HueForge description:
Settings:
- Layer Height = 0.08mm
- Initial Layer = 0.16mm
- Infill = 100%
- Outer Wall Speed = 60mm
- Inner Wall Speed = 120mm
- Infill Speed = 150mm
HueForge Description:
The Model is 196x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Elegoo Black (Pro) Transmission Distance: 0.6
PLA Inland Natural Transmission Distance: 21
PLA Elegoo Gray Transmission Distance: 3.3
PLA+ Elegoo White (Pro) Transmission Distance: 3.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black (Pro)
At layer #8 (0.72mm) swap to Natural
At layer #17 (1.44mm) swap to Gray
At layer #20 (1.68mm) swap to White (Pro) for the rest.