1 / 3
Prusa injection molded holder upgrade to use bearings 608 — image 1
1 / 3

Prusa injection molded holder upgrade to use bearings 608

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This model allows the injection wheels to be replaced with bearings. Then the spool can run more smoothly.

Rating
0 / 5
Likes
9
Downloads
31
Makes
0
Views
351
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

The design of this part was driven by the need to minimize friction between the holder wheels and the spool. When manually rewinding filament between spools to create longer samples, I often encountered issues at higher speeds where the spool would slip, causing the wheels to rub against it (as shown in the photo). This disrupted the rewind process. 

By incorporating bearings into the holder, the rewinding process has become significantly smoother. The spool now rotates with less resistance, ensuring a more efficient transfer and reducing stress on the extruder during operation. This simple enhancement has improved both performance and longevity for my setup.

The part is intended for bearing type 608 (outer diameter 22 mm, inner diameter 8 mm, width 7 mm)).

You need to print 8 pcs (0.2mm layer height, supports needed) and then replace the original wheels with 4 bearings.

Tags