SUBARU-WRX-2018-NATIKA-REVERSE-CAMERA-BRACKET
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CAMERA SUPPORT FOR REAR FACING CAMERA. REPLACES GENUINE CAMERA WHICH WAS NOT COMPATIBLE WITH IDOING HEAD UNIT
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
I had to change out the original reverse camera in my WRX as it did not work with the new Head Unit. I purchased a Natika Backup camera from Amazon, which works well, but the method of installation did not suit me, I did not want to put a hole in the body for it. I designed a bracket in Tinker Cad, which was fun. The camera is a bit of a pain, in that it has a long threaded column at an angle, which the wire comes out from, so I had to loop the wire back around and bring it through the bracket via a small hole. I would recommend waterproofing the hole, and the backing plate is a tight fit, but I will add some superglue to prevent it coming loose from vibration. the camera is also held in place by the trim on the bootlid, so it won't just fall out. I did it in Creality PLA filament, time will tell if the hot weather will affect it.