Circular Sock Knitting Machine - Parametric OpenSCAD Cylinder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to adjust the needle slot widths or needle count so have created this parametric version of the cylinder.
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 232
- Makes
- 0
- Views
- 1,685
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
OpenSCAD Parametric Circular Sock Knitting Machine Cylinder
All dimensions in mm
Latest changes:
05/01/2025 - Asphalt's corrections to minor print artefacts. Thanks!
22/12/2024 - Make spring slot just a tiny bit taller than the spring. Corrected “spring_diameter” variable name. Made “number of slots” text raised.
22/11/2024 - Spring slot made deeper to hold disengaged needles in up position, and shaped to make it easier to insert needles. Also, now respects enable_ribber_stop flag.
20/11/2024 - Increased nut_diameter from 5mm to 6mm, and reduced nut_height from 3mm to 2.5mm.
19/11/2024 - There is now a ribber-stop option in the configuration.
17/11/2024 - Needle slot depths deepened slightly; Top hook width narrowed slightly; Script tidied.