Modular Engine Shed - Brio Compatible
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: Engine Shed - front trim_0.4n_0.15mm_PLA_MINIIS_7m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Do your trains need a spot to sleep at night? This modular engine shed allows you to house the whole fleet.
- Rating
- 4.5 / 5
- Likes
- 74
- Downloads
- 341
- Makes
- 4
- Views
- 1,317
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Do your trains need a spot to sleep at night? This engine shed gives one engine a spot to rest, or stick multiple together to house the whole fleet.
A bit of CA glue is required for assembly. 10 6mm by 2mm round magnets are optional to secure the roof and to allow multiple sheds to snap together.
Printing and assembly instructions:
- Print all the required pieces
- The shed piece gets printed right-side-up on its base, with an optional color switch just about 12mm. No supports.
- Print 7 windows, face down. No supports.
- Print the roof on one of the large flat sides. No supports.
- Print the front trim, front down. No supports.
- Use CA glue to mount the windows and front trim in the openings.
- Use CA glue to attach a 6mm by 2mm in each hole. Be mindful of the orientation of the magnets' poles. The magnets on the bases of the shed should be facing north out on one side and south on the other. In the roof, magnets on the shed should both be north facing toward the inside of the shed, and on the roof piece they should be facing south out.
If you like this model check out this collection of my other toy train models.