1 / 2
GE 4ft Single Row Joining Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A plate to join the 2 halves of the Gilbert Engineering 4ft Arch Single Row 10mm Coro
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I printed this in Draft with 4 walls with a 0.8 nozzle with PETG that really needed drying and it is really strong. The default print is 10mm tall, if you flip it over and print it 8mm into the bed you get a nice front plate to sandwich the coro between but this is optional.
I used 4 3.6mm cable ties. You will need to drill 4 extra holes, use a 4mm drill bit.
https://buildalightshow.com/gilbert-engineering-props/228-4ft-arch-single-row-10mm-coro-black.html