Le verre de trop

Le verre de trop 

• Le verre de trop  is a manual cocktail machine is a device designed to facilitate the preparation of cocktails while letting the user manage the process. The machine has bottles where the different ingredients (spirits, juices, syrups, etc.) are stored. These are connected to taps for easy dispensing. The user operates taps to pour the desired quantities of ingredients. Once the ingredients are in the glass or shaker, it is up to the user to mix, shake or garnish the cocktail according to the recipe.

• The operation is simple. it is to crush or not a pipe with a screw to let pass or not the fluid passing through the pipe and coming from a bottle

• This is a structure that measures 500mm long for 340mm height 
  consists of a main structure 200 mm long and 340 mm high
  and 2 identical containers on each side of the main structure, measuring 150 mm long to 65 mm high.

main structure:

You have to print or cut:

• 1 main board.
• 2 main structure - side plate.
• 6 bottle holder.
• 6 tube clamp valve.
• 4 corner bracket.

contruction:

• the système of the tube clamp valve is made of the tube clamp valve, en crank and a m8 screw length 3cm.
• 

• the  tube clamp valve will be our tap, that is to say that the bottle we will come to put in the bottle holder will have a pipe welded to the cap. this pipe will pass into the tube clamp valve and will be crushed by a screw to not let the liquid through. Conversely, to let the liquid pass through, just unscrew the screw and the hose will no longer be crushed. 

Assembly of the main board, the bottle holder and the tube clamp valve:

• To assemble its three parts you will need M10 screws length 16 at least and a bolt that goes with it

• and do it again for the other 5 

• to assemble this you just have to position it like this:

• if you do not want to stick for ease of transport reason you can add the corner bracket for a better stability :

Main container

• All the Main container in duplicate (to create 2 Main container, one on each side of the Main structur. )
• all the main container is in tilleul 5mm and stick to wood glue.
• each plate is notched to be embossed to create the main container

Collecting tray

• All the pieces of the Collecting tray in duplicate (to create 2 Collecting tray, one in each main container. )
• all the collecting tray is in acrylique 3mm and stick to superglue.
• each plate is notched to be embossed to create the collecting tray.

• to pull the collecting tray you ha to add a handle.
• 

Glass holder

• All the pieces of the Glass holder in duplicate (to create 2 Glass holder, one in each main container. )
• the glass holder is made of 2 part the tongue and the support.

• to assemble its 2 piece you will need only 4 screw M10 of minimum length 10mm and the bolt that goes with it. And you will get to that: