Voronish 1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3D printer build/mod based on the Voron 2.4 and the Trident using two 12mm rods for the front z
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 90
- Makes
- 0
- Views
- 1,155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Please note that I have a newer build, the "Voronish 2", using MGN12H rails only. If you are building something with old parts and you don’t have all the MGN rails required, the Voronish 1 will work well!
Follow the general recommendations for printing Voron parts. Some heat set brass inserts are needed for assembly of the parts I have published here.
I have published a complete build series about this printer:
https://www.youtube.com/playlist?list=PLHk1C7nPAl804AaKE_XwfZFxv7xstoq0u
This is part 3 that described the z-axis. Please note that this build/design changed a lot during the build process!
In part 5 I added resin to the bottom covers. If you plan to build an enclosed printer, please check max temp for the resin!