Contemporary Stand-off House Numbers & Name Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All numbers from 0-9 are 140mm in height in an Aerial font, including a personalised road/street name board.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 238
- Makes
- 3
- Views
- 1,584
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
This is a remix from another design of mine, which can also be found at the following link below: https://www.printables.com/model/104691-contemporary-stand-off-house-numbers
The house numbers can be mounted on a customisable road/street name board. Use the link https://3d.sui.li/housenumber to generate an STL file with your desired text. Adding a colour change at layer height of 16.10mm is recommended, giving a pleasant contrast of colour for the personalised name. However, a blank number board file has been attached if you prefer to leave it blank.
See the “House Numbers - Assembly Instructions” PDF on assembling the numbers.
Number (0-9) Print Information:
- 0.20 (Speed) mm layer height.
- 15% infill.
- 0.4mm nozzle diameter.
- No Support material is required. (Front face of the numbers, facing the print bed surface)
Number Board Print Information:
- 0.20 (Speed) mm layer height.
- 15% infill.
- 0.4mm nozzle diameter.
- No Support material is required (Rear face of the number boards, facing the print bed surface)
All other parts - Print Information:
- 0.20 (Speed) mm layer height.
- 15% infill.
- 0.4mm nozzle diameter.
- No Support material is required.
Acknowledgement
I want to thank sui77 for help in creating the STL model generator. Please visit sui77 Printables page using the link https://www.printables.com/@sui77