T-Slot Christmas Light Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clip to help you attach Christmas Lights to T-slots!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clip that allows you to easily and firmly mount string lights to T-Slots that are ~8.13mm wide(such as 80/20 15 or 40 Series). The wire can be run inside the channel to keep it looking neat. The base of the lights must be the thinner style(less than 8mm on the thinnest side) and have a built in clip (See pictures).
I used this specific C9 string light, but you can get them in other sizes and styles as well…
I recommend printing in PETG at 70% infill with .20 layer height. PLA and ASA were not tested but may be too brittle to work. Orient the model so it prints with the light-facing side facing downward(the model will be upside down when it's loaded into the slicer).