1 / 4
DPS/WEL DIN rail case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN rail mount case for DPS/RK power supply or WEL electronic load modules.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 58
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- BSD License
DIN rail mount case for DPS/RK power supply or WEL electronic load modules.
Uses 12mm openings for
- button,
- safety 4mm lab sockets and
- power input (e.g. my panel mount USB-C PD trigger holder)
The back attaches via M3x8 counter sink screws into threaded inserts and has an opening for the fan on the WEL3005 module. The openings for the threaded inserts are 4.1mm so it should work with the common heat set inserts but I happened to use these ones, which work quite well.
The DPS5005 in the side-by-side picture is running the OpenDPS firmware.