Christmas Bookmark - Santa Claus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Christmas Bookmark - Santa Claus
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 57
- Makes
- 1
- Views
- 233
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Here is: Christmas Bookmark - Santa Claus
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 52.67x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Red
At layer #20 (1.68mm) swap to White for the rest.