1 / 7
Home Assistant NUC top
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Home Assistant branded replacement top for a NUC computer. Prints in three pieces and presses together.
- Rating
- 1 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 1
- Views
- 432
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Home Assistant NUC top
Home Assistant branded replacement top for a NUC 7 computer.
I designed this for a NUC7i7BNH but may work for other NUC’s that are 111mm X 115mm.
Assembly:
- Remove NUC top starting at the notches with guitar picks and move around until it is released.
- I used my Thwack to press the white parts in to the blue part.
- When pressing the new top on, the tolerances are very tight and it only aligns one way. The layer lines can be felt as you get it to go on. The layer lines are what helps hold the top in place.
Print Settings:
Filament: PETG
Nozzle: 0.40mm
Layer Height: 0.20mm
Textured sheet makes the blue look great.
I didn’t use input shaping to help with the small details on the lettering.