1 / 2
Bambu X1C TPU Guide Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed this little guide bracket to prevent TPU filament from jumping off the spool on my X1 Carbon.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Designed this little guide bracket to prevent TPU filament from jumping off the rear mounted auxiliary feed spool, particularly with a full spool. When it jumps it can wind around the spool support and disrupt the print, this little guide prevents it.
Attaches to the back of the printer with a few pieces of 20mm wide double sided foam tape and uses a spare bit of Teflon tubing to connect to the extruder feed coupling.
Printed in lava grey PLA-CF.